edup small header

Wi-Fi Booster

EDUP High Power EP-AB009 Strong Signal 20 Watt WiFi Amplifier Wireless Signal Booster

Product Model: EP-AB009

Product Description

*Supoort Standard: IEEE 802.11b/g/n
*Frequency: 2400-2500Mhz
*Working Pattern: TDD
*RF Output Power: 39dBm(8W)
*Input Trigger Power: Min:3dBm, Max: 20dBm
*Transmit Gain: 17dB typical
*Receiver Gain: 11dB typical
Switch Time Delay:>1us
Noise Figure: 30dB(typical)
Working Voltage: 6-18VDC,12V/2A
*Distance: 3-5KM

Share this product

1.Brand new and high quality.

2. Low-noise receive gain 2.5dB .

3. Led status: Green (transmit) / Red(receive) /  Change TX with RX( mix red with green)

4. High Gain, High Value, High Performance.

5. Wide Working Voltage 30—54V.

6. Plug-and-play, Easy installation, no driver needed.

7. Ideal for increase the 2400-2500 MHz frequency devices. Adopt Time Division uplex ( TDD )

8. Increase the effective range and coverage area of your Wi-Fi network.

9. Maximum output power of 20000mW by the Booster.

10. The amplified wireless signal may even penetrate complex environments with many walls and obstacles.

11. Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g, 802.11n (2.4Ghz mode only).

Using Precautions

1.Make sure all power supply to the booster and the AP/Router unit be disconnected before removing or changing antenna.

2.When finishing connecting the booster and the AP/Router, restore power supply first to the booster and then to AP/Router subsequently.

3.Waterproof, lightning protection equipment should be attached to outdoor antenna.

4. Keep away from heat and keep ventilated.

5. Please comply with local regulations of electromagnetic radiation.


With the future of home entertainment becoming more and more wire free, EDUP’s family of  Home Network devices take advantage of the latest in technology, bringing both entertainment and convenience together at last.